System Setup; Angle Mark; Osd Language - RCA RS2202 Manual De Instrucciones

SYSTEM SETUP

Menu operation
P ress [SETUP] button in the remote controller, the SETUP MENU (main) will be displayed.
1. After accessing the [SETUP] Menu, press and buttons to select a desired item, then
press [ENTER] button to enter the sub-menu. In the submenu, press and buttons to
select the desired one, then press the [ENTER] button to confirm. Now, setup of this current
function is completed.
2. To end the setup, press the [SETUP] button again. In the SETUP MENU, you may choose
any of the following options as you like.
General setup page
This option is used to set up TV screen format, video function and DVD function, with options of
"TV DISPLAY", , "ANGLE MARK", "OSD LANG", "CLOSED CAPTIONS", "SCREEN SAVER"
and "LAST MEMORY".
TV Display
4:3 PAN SCAN: When the unit connects to the normal TV set, the wide-screen image shows on
the full screen ,but some part is cut off.
4:3 LETTERBOX: When the unit connects to the normal TV set, the wide-screen image shows
and black bars appear on the top and bottom of screen.
16:9: Use this item when the unit is connected to the wide screen TV set.
Wide Squeeze: Use this item when the unit is connected to the wide screen TV set.

ANGLE MARK:

When a DVD with multiple angles is used, you can select a particular shooting angle.

OSD LANGUAGE:

You may use this item to set the language of the setup menu and screen display language.
- 50 -