Cleaning And Maintenance - MAXI-MATIC Elite EPM-250 Manual De Instrucciones

CLEANING AND MAINTENANCE

•
It is strongly recommended to clean the kettle after EVERY use.
•
NEVER IMMERSE THE KETTLE IN WATER OR ANY LIQUIDS.
•
Do not use benzene, scrubbing brushes or chemical cleaners, as these will
damage the kettle.
•
After using the popcorn machine, allow it to cool, and use a warm damp
cloth to clean the interior chamber windows of the main unit after each
use to prevent build-up.
•
It is strongly recommended to wash and dry the popcorn tray, measuring
cup and spoon after each use. (Do NOT wash in dishwasher.)
•
The plexi door is removable by simply lifting it off its hinges. The door can
be hand washed in warm soapy water. Do not use any abrasive cleaners,
scouring pads, or steel wool.
•
Do not clean plastic tray with any abrasive cleansers, scouring pad or steel
wool.
•
Light bulb is replaceable with an AC120V 10W bulb.
KETTLE QUICK CLEANING PROCEDURE
Turn the POP switch to off. Pour 4 to 6 ounces of water (NO detergent is necessary)
into inner kettle popper. Switch POP to on to boil the water and let the stirrer turn
in order to remove excess oil or kernels stuck inside the kettle. Leave on for
approximately 1-2 minutes. Shut off and let cool. After cooling, pour out the water
and discard.
CAUTION: THE KETTLE MAY BE HOT.
You may also remove the kettle and clean it with a non-abrasive scouring pad (Not
included). NEVER immerse kettle or electrical plug in water or other liquids. You
may also consider using a cleaning product designed for removing carbon deposits
and is specially formulated to clean popcorn kettles.