Technical Specifications - Creative BT-W1 Manual Del Usuario

To reconnect to a previously paired device
After the BT-W1 has been paired to a device, it will always attempt to reconnect to the previously
paired device when the BT-W1 is plugged into a USB port. Always ensure that the receiving device has
its Bluetooth enabled and ready to accept connections. You may also try the following.
a) Ensure that the receiving device has its Bluetooth enabled and ready to accept connections
b1) Plug out and plug in your BT-W1 from the computer and wait for it to auto connect
Or
b2) With the BT-W1 in the computer USB port, press the button on the BT-W1 to initiate a
connection to your device.
Note: The BT-W1 will stream any audio (including startup, shutdown or warning tones) played from your computer. Ensure that the
volume is kept to a comfortable level.
To disconnect from the BT-W1
To stop streaming music from the BT-W1 to your receiving Bluetooth device, simply either plug out
the BT-W1 or press the button once. Pressing another time will reconnect the BT-W1 back to last
connected Bluetooth device.
Bluetooth Version
Operating Frequency
Supported Bluetooth profiles
Supported Codec
Operating Range
Product Operating Temperature Range
Compatibility disclaimer: Wireless performance is dependent on your device's Bluetooth wireless technology.
Refer to your device manufacturer's manual.
Creative will not be liable for any lost of data or leakages resulting from the use of these devices.
The BT-W1 is powered directly by your computer USB port (5VDC, 500mA).

Technical Specifications
Bluetooth 2.1 + EDR (Enhanced Data Rate)
2402 -2480MHz
A2DP (Wireless Stereo Bluetooth ), AVRCP
FastStream, apt-X
®
Up to 10 meters, measured in open space. Walls and
structures may affect range of device.
0˚C to 45˚C
and SBC