Back View; Led Indicators - X-Micro XWL-11GRAR Manual De Instrucciones

§ Connect the wireless broadband router to your network
1. Connect the power adapter to the receptor at the back panel. Plug the
power adapter into the outlet. The power LED will turn on to indicate this
proper operation.
2. Power off your cable/ DSL modem. Using an Ethernet cable to connect the
Ethernet jack located on the cable/ DSL modem and the WAN port on the
back panel of this router. After this connection, please power on your cable/
DSL modem. The WAN PORT will illuminate to indicate the proper
operation
3. Insert an Ethernet cable to the LAN port on the back panel of the router and
an available Ethernet port on the network adapter in the computer that will
be used to configure the router. The LED light of LAN port1 will illuminate to
indicate the proper connection.
4. Then, restart your computer.
5. Connect your Ethernet-quipped computers to the remaining Ethernet LAN
ports on the back panel of this router with the additional Ethernet cables.

◆ Back View:

◆ LED Indicators:

LED Color
Green
Power
Green
Status
On
WAN
On
WLAN On
Off
Status Description
Indicates proper connection to power
On
supply.
OFF The unit is not receiving power
Indicates that the device is
On
connected to the WLAN.
Indicates connection to the WAN port
Blinking Data transmission.
Link is established
Blinking Packet transmit or receive activity
— No Link activity
3