Supra NÉO 67 G Instrucciones De Instalación página 20

HEARTH TYPE ASSEMBLY
Requires 2 people:
1. Supporting wall (M0 class materials)
2. Decorative hood (optional)
3. Decompression hole
4. Air access through the casing
5. Rear stop (depending on assembly)
6. Flue pipe
7. Connection sleeve (not supplied)
8. Connection pipes Ø 150 (not supplied)
9. Insulated casing
10. Hot air outlet grille (not supplied)
11. Insulation (if necessary)
12. Combustion air connection (depending on
assembly)
13. Hot air connections Ø 125 or 150 (not
(1)
supplied)
14. Hot air diffuser (not supplied)
15. Wooden beam (depending on model)
16. Beam protection (not supplied)
(2)
17. Hot air damper
(1)
18. Hearth support
19. Fan (depending on model)
(1)
Accessory available from your dealer.
(2)
When delivered, hot air directed towards hood.
Leg option with
screws
(not included)
2
(600 cm )
(1)
(1)
(1)
(1)
(1)
(1)
ASSEMBLING THE HEARTH
Attach the air connection collar if necessary (specific
instructions).
Place the hearth on runners or legs (PS 67 optional)
Attach the hearth to the support in its final location. It is crucial
that the appliance is perfectly level, especially to guarantee its
stability. Optional adjustable base (PS 67)
Attach the frame's lower cross member using the supplied
screws. The hearth is now ready to be connected.
HEARTH