Battery Information - Logitech BLOK Guía De Configuración

Logitech BLOK - Protective Keyboard Case - For iPad Air 2
Replacing the keyboard batteries
If the status light is red the keyboard
batteries need to be replaced.
1. Place your keyboard on a flat surface.
2. Using a fingernail or thumbnail,
pry open the battery holder from
the side of the keyboard.
3. Remove the old batteries and insert
new batteries.
4. Close the battery holder.
* Actual battery life will vary with use, settings, and environmental conditions.
All manuals and user guides at all-guides.com

Battery information

• A set of fully charged batteries
• Replace the batteries if the status light
• When your batteries need to be replaced,
• When not in use, turn the keyboard off
• The keyboard enters sleep mode
English 11
provides about four years of use when
the keyboard is used about two hours
a day.*
turns red briefly after the keyboard
turns on.
we recommend that you use Panasonic
CR2032 3V 225mAh Lithium coin
batteries.
to conserve power.
automatically if not used for a while.
Press any key to wake it.