Installation
1 Select a location that will support four times the total weight of the product
to be installed.
2 Loosen the Nuts of the Holder Plate to remove the Arm.
3 Mark and drill 8 holes into the Mounting Plate and insert the Anchor Bolts
or Nuts (M10).
4 Use the "Anchor Bolts or Nuts (M10)" to secure the Mounting Plate to the
wall.
Mounting Plate
5 Insert the Arm into the Mounting Plate and secure the Holder Plate.
Washers
6 Pull out the cables from the
bottom of the Arm to the top and
insert the Cap into the bottom.
00873F-SCX-300LM-NEW.indd 2
All manuals and user guides at all-guides.com
7 Mount the Camera set on the Pipe.
Install the camera according to the camera's installation guide.
8 Place the Arm into a desire position and use the Bolts to fix it.
Anchor Bolts
Nuts
Holder Plate
Camera set
Camera set
Bolts
Product Specifications
•
Weight : 3500g
•
Ciężar : 3500g
•
Material : Aluminum
•
Materiał : Aluminium
Operation temp. : -50°C~60°C
Temperatura robocza : -50°C~60°C
•
•
Operation hum. : 0~100%
Wilgotność robocza : 0~100%
•
•
Poids : 3500g
Ağırlık : 3500g
•
•
Matériau : Aluminium
Malzeme : Alüminyum
•
•
•
Température de fonctionnement :
•
Çalışma sıcaklığı : -50°C~60°C
-50°C~60°C
•
Çalışma nem değeri : 0~100%
•
Humidité de fonctionnement :
0~100%
•
Gewicht : 3500g
•
Hmotnost : 3500g
•
Material : Aluminium
•
Materiál : Hliník
Betriebstemperatur : -50°C~60°C
Provozní teplota : -50°C~60°C
•
•
Betriebsluftfeuchte : 0~100%
Provozní vlhkost : 0~100%
•
•
Peso : 3500g
重量 : 3500g
•
•
Material : Aluminio
材質 : アルミニウム
•
•
•
Temp. funcionamiento : -50°C~60°C
動作温度 : -50°C~60°C
•
•
Hum. funcionamiento. : 0~100%
動作湿度 : 0~100%
•
Peso : 3500g
重量 : 3500g
•
•
•
Materiale : Alluminio
•
材料 : 铝
•
Temperatura di esercizio : -50°C~60°C
•
工作温度 : -50°C~60°C
•
Umidità di esercizio : 0~100%
•
工作湿度 : 0~100%
무게 : 3500g
•
Вес : 3500g
•
재질 : Aluminum
•
Материал : Алюминий
•
Температура при работе :
사용 온도 : -50℃~60℃
•
•
-50°C~60°C
사용 습도 : 0~100%
•
Влажность при работе : 0~100%
•
Product Outline
AB68-00873F
2009-04-08 오후 5:13:22