Installing The Glass Shade & Light Bulb - minkaAire Mojo II Manual De Instrucciones Certificado De Garantia

WARNING: Shut of the power supply before removing or replacing lamp. If you accidentally come
into contact, wipe thoroughly with a clean, lint-free,cotton cloth. Use light bulb in accordance with
the fan's specification. TO REDUCE THE RISK OF FIRE DO NOT EXCEED MAXIMUM WATTAGE
RATING.
Step1. Install 3*60W E12 bulbs (included) into socket.(Fig.10)
Step2. Remove the rubber washer, metal washer, metal nut, metal cup and finial from the light kit
assembly. Place glass shade over the light kit stem, secure with the rubber washer, metal washer,
metal nut, metal cap and finial. Do not over tighten.(Fig.10)
Step3. Attach the pull chain fob to the chain on the light kit assembly.
INSTALLING THE GLASS SHADE & LIGHT BULB
Fig . 10
Glass shade
Bulb
Rubber washer
Metal cap
Metal washer
Finial
Metal nut
8