Using The Included Bracket; Removing The Unit (Installed With The Supplied Mounting Sleeve) - Pioneer MVH-S100UI Manual De Instrucciones

Tapping screw (5 mm × 9 mm,
not supplied with product)
Mounting bracket
Dashboard or console

Using the included bracket

Check to make sure that the included
bracket matches your particular
model of vehicle and then attach it to
the unit as shown below.
Screw
Bracket
Removing the unit (installed
with the supplied mounting
sleeve)
1
Remove the trim ring.
Trim ring
Notched tab
• Releasing the front panel allows
easier access to the trim ring.
• When reattaching the trim ring,
point the side with the notched
tab down.
2
Insert the supplied extraction
keys into both sides of the unit
until they click into place.
3
Pull the unit out of the dashboard.
17
En