Monti POWER MBX Manual Del Usuario página 7

®
MBX PNEUMATIC
For your safety
Working safely with this machine is possible only when the operating and safety information are read completely
and the instructions contained therein are strictly followed.
Wear safety glasses, protective gloves and sturdy shoes.
The parts rubbed-off while working are detrimental to health. Wear a dust mask!
• When working with the machine, always hold it firmly with both hands and provide for a secure stance.
• Use only original MBX
• Before carrying out any work on the tool itself, during pauses in the work and when not in use, disconnect the air
supply.
• Do not use combustible gases or oxygen instead of pressurised air.
• When working on metal, flying sparks are produced. Take care that no persons are endangered. Because of the
danger of fire, no combustible materials should be located in the vicinity (spark flight zone).
• Pay attention to the direction of rotation. Always hold the machine so that sparks or dust fly away from the body.
• Do not drill into housing or attach rivets in order to mark the machine. The insulation is then no longer ensured.
Use stickers.
• Use only original MBX
Tool Specifications
®
PNEUMATIC
MBX
Operating pressure
Air consumption (average)
No-load speed
Pressurised air connection
Hose width (min.)
Weight
Usage
®
MBX PNEUMATIC is intended for the removal of undercoating, PVC and other sealing compounds as well as for
paint removal from car bodies especially at welding seams resulting from accident damage. Do not use this product
in any other way as stated for normal use.
®
belts approved for pneumatic machines.
®
parts and accessories.
6.2 bar (90 psi)
500 l/min
-1
0 – 3500 rpm
R 1/4"
9.5 mm (3/8 ")
1.1 kg
Noise/vibration information
Measured values determined according to DIN 45635-
21; DIN EN ISO 3744.
Typically the A-weighted noise levels of the product are:
sound pressure level: 83 dB (A); sound power level:
88 dB (A).
Use ear protection!
The typical weighted acceleration is 1 m/s
ENG
2
.
7