August EP616 Manual Del Usuario página 6

- To disable the Multipoint function on the EP616:
1. Turn off the EP616 and all source devices.
2. Press and hold the Power button for 5 seconds to turn on
the EP616 and put it into pairing mode. In pairing mode the
status LED will flash red and blue.
3. Double press the power button to disable the multipoint.
6 Charging .
Connect the EP616 to a powered USB port using the provided
USB charging cable. While charging, the status LED will light
red. It will turn blue once the battery is fully charged.
A full charge takes approximatively 1.5 hours depending on
power input.
Note:
1) Ensure that the output voltage from the USB port or the
charger is 5V. Charging voltage greater than 5V may
damage the headphones.
2) Please fully charge the EP616 before first use or if left
unused for a long period of time.
If you are using a smart USB charger, use the common USB
port and ensure that the output voltage is 5V.
- 7 -
7. Specification
Bluetooth Version
Bluetooth Distance
Transmission Frequency
Support Profile
Speaker Diameter
Impedance
Sensitivity
Speaker Output
Frequency Response
Signal and Noise Ratio(SNR)
Distortion
Battery Type
Charging Time
Continuous working time
Standby Time
Dimensions
Net Weight
v4.1 with aptX
10m
2.40GHz-2.48GHz
HSP/HFP/A2DP/AVRCP
Ø6mm
16Ω
86+/- 3dB
3mW x 2
120Hz-20KHz
≥80dB
≤3%
3.7V/110mAh Built-in Li-Polyme Battery
1.5Hours
7 hours
18days
550 × 26× 12mm
10g
- 8 -