Publicidad
Idiomas disponibles
Idiomas disponibles
Product Overview and activation
Open the back panel to insert the batteries. Please respect the correct
polarity. Now, close the back panel again. Slide the ball joint in place until it
locks in place and attach the wall mount on the ball joint. Your PIR sensor is
now ready to be installed on the mount.
General installation guidelines
Avoid positions that are close to a window, air conditioners, fluorescent
lights, heaters, refrigerators, stoves, and direct sunlight and other places
where temperature would change rapidly and air flow is high. If there are
two detectors in the same detecting range, please adjust the position to
avoid interference and false alarms.
Copyright © 2019 Tiiwee. All rights reserved. This manual or any portion thereof may not be reproduced or used in any manner whatsoever.
Publicidad
