Control Panel; Control Panel Features - LG LDFN343 Serie El Manual Del Propietario

Ocultar thumbs Ver también para LDFN343 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

us_main.book.book Page 23 Thursday, January 21, 2021 10:27 AM

Control Panel

Control Panel Features

Power On/Off Button
a
• Press this button to turn the washer on or off.
• If there is a power surge, power outage, or disruption of any kind, power is automatically turned off
for safety.
• When power is connected again, the dishwasher will turn on automatically and resume the cycle.
NOTE
• When opening or closing the product door, keep fingers and hands away from the control panel to avoid
activating buttons.
Display
b
e
: Rinse Aid Icon
- This icon illuminates when the rinse aid level is low. The LED automatically shuts off when the rinse
aid is refilled or the level is set to 0.
- Refer to the Rinse Aid Dispenser Adjustment section.
: Digital Display
8:88
- The digital display on the control panel shows the ESTIMATED cycle time. When the cycle and
options are selected, the display shows the total estimated time to complete those selections.
During operation, the display shows the remaining estimated operating time.
NOTE
• The estimated time shown on the display does not include delay times for heating water, etc.
• If Delay Start is selected, the display shows the delay time in hours.
• Cycle time may vary depending on the soil level of your load.
,
: Control Lock
k
CL
- The Control Lock feature helps prevent settings from being changed during a cycle. Selecting this
feature locks all of the buttons, except for the Power button, on the control panel. This feature
does not lock the door.
- While a cycle is running, press and hold Flex Zone and High Temp. simultaneously for three
seconds to activate or deactivate Control Lock.
- To start a new cycle, deactivate Control Lock.
: Machine Clean
a
- The Machine Clean icon flashes every 30 cycles. To activate or deactivate the icon, press and hold
the Machine Clean and Flex Zone buttons for three seconds.
- If the High Temp. option is added to a cycle, the Machine Clean icon stays lit at the end of the cycle
if the dishes were properly sanitized.
: Night Dry
m
- This indicator lights up when Night Dry is selected.
OPERATION
23

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Ldfn3432t.asteeus

Tabla de contenido