Aeroflex 8800 Serie Manual Del Usuario página 6

International Power Requirements
The AC power cord must meet local regulations and power requirements. Check with local standards and regulations to ensure the
power cord being used meets all local safety regulations.
Use Recommended Fuses Only
Use only fuses specifically recommended for the equipment at the specified current and voltage ratings. Refer to Performance
Specifications for fuse requirements and specifications.
Internal Battery
The Digital Radio Test System contains a Lithium Ion Battery.
EMI (Electromagnetic Interference)
SIGNAL GENERATORS CAN BE A SOURCE OF ELECTROMAGNETIC INTERFERENCE (EMI) TO
COMMUNICATION RECEIVERS. SOME TRANSMITTED SIGNALS CAN CAUSE DISRUPTION AND
INTERFERENCE TO COMMUNICATION SERVICE OUT TO A DISTANCE OF SEVERAL MILES. USER OF THIS
EQUIPMENT SHOULD SCRUTINIZE ANY OPERATION THAT RESULTS IN RADIATION OF A SIGNAL
(DIRECTLY OR INDIRECTLY) AND SHOULD TAKE NECESSARY PRECAUTIONS TO AVOID POTENTIAL
COMMUNICATION INTERFERENCE PROBLEMS.
Input Overload
REFER TO PRODUCT SPECIFICATIONS FOR MAXIMUM INPUT RATINGS FOR ANT AND T/R INPUT
CONNECTORS.
Fire Hazards
MAKE SURE THAT ONLY FUSES OF THE CORRECT RATING AND TYPE ARE USED FOR REPLACEMENT. IF
AN INTEGRALLY FUSED PLUG IS USED ON THE SUPPLY LEAD, ENSURE THAT THE FUSE RATING IS
COMMENSURATE WITH THE CURRENT REQUIREMENTS OF THIS EQUIPMENT.
Static Sensitive Components
This equipment contains components sensitive to damage by Electrostatic Discharge (ESD). All personnel
performing maintenance or calibration procedures should have knowledge of accepted ESD practices and/or be
ESD certified.
8 8 0 0 S e r i e s G e t t i n g S t a r t e d M a n u a l
S ubj ect to E xpor t C ontr ol , see C over P age for detai l s.