Advanced Operations - SoundID EarModule SM100 Manual Del Usuario

To Change Hearing Enhancement programs (PersonalSound levels), press the
Personalized Program Button to access the SM100's four different sound settings:
One beep Normal Listening Enhancement
Two beeps Moderate Listening Enhancement
Three beeps Strong Listening Enhancement
Four beeps Mute (Power Save Setting)*. This setting turns off Environmental Mode
(for more information about this, please see Operating Modes section).
*Power saving setting will extend battery life.
8
Advanced Options
The SM100 EarModule includes the following advanced features, and enables you to take
advantage of other features specific to your mobile phone.
Call Mute: Activate and deactivate by pressing and holding Volume Down until you hear a beep.
Call Reject: To reject an incoming call, press and hold Volume Down until you hear a beep.
Re-establish connection with the mobile phone: Move the SM100 within 33 feet of the
phone and press the EarModule's Main button.
Answer Call Waiting * : When you hear the alert tone, press the Main Button. The first caller
will be placed on hold and the new call will be answered. If the Main Button does not
answer call waiting properly, use the alternative method; Press and hold the volume up
until you hear a beep.
Swap Active Call and Held Call * : Press and hold Volume Up until you hear a beep.
Voice Dialing * : Press and hold Volume Up until you hear a beep.
* These are phone-specific features. In order to use them, you'll need to verify that the phone has
.
them activated
English
9