GYS 025981 Manual De Uso página 10

Operating manual
SAFETY INSTRUCTIONS
This manual contains safety and operating instructions, to be
followed for your safety. Please read it carefully before using
the device for the first time and keep it for future reference.
Read and understand the following safety instructions before
use. Any modification or updates that are not specified in
the instruction's manual should not be undertaken. The
manufacturer is not liable for any injury or damage due to
non-compliance with the instructions featured in this manual.
If there is any issue or uncertainty, please consult a qualified
individual to operate the equipment correctly. This device may
only be used for ticket printing and/or data transmission within
the limits indicated on the device and manual. The operator
must observe the safety precautions. In case of improper or
unsafe use, the manufacturer cannot be held liable.
The device is destined to be used indoors. Must not be exposed
to the rain.
Do not use the charger if the mains cable or plug is damaged.
Do not place the unit near a heat source/direct sunlight and
durably high temperatures (above 50 ° C)
This machine must be connected to an earthed socket.
Maintenance
• Maintenance should only be carried out by a qualified person.
• Warning! Always disconnect from the mains before performing
maintenance on the device.
• Do not use solvents or any agressive cleaning products.
• Clean the device's surfaces with a dry cloth.
Regulations:
• Equipment complies with European directives
• The declaration of conformity is available on our website.
• EAEC Conformity marking (Eurasian Economic Community).
• Material complies with British requirements. The UK Declaration
of Conformity is available on our website (see cover page).
• Device consistent with Moroccan standards.
• The C‫( م‬CMIM) declaration of conformity is available on our
website.
Waste management:
• This material is subject to selective collection. Do not throw
away in a household bin.
10
Translation of the original
instructions
SMART HUB MODULE