Joycare JC-243G Manual De Instrucciones página 11

INSTRUCTIONS FOR A CORRECT USE OF THE APPLIANCE
Press the button; the backup lamp would switch on with a
buzzer brief ringing The writing "WAIT" flashes on the display
and the 10 seconds initial warm-up begins, there is a
countdown on the LCD from 10-0; then the writing "WAIT"
disappears and the "BLOW" guide you to have a testing
immediately.
When the "BLOW" appears, blow into the "Gas Entry" . Please
have a deep breath and breathe out directly to gas entry
within 3 cm from the sensor. The measured value will be
displayed for 8 seconds and at the same time you hear a buzzer
ringing; then the tester will switches itself automatically off.
For a new testing, please press the switch button again and
repeat the above steps.
For a more accurate reading, it is advisable to wait 60 sec.
between different measurements.
IMPORTANT NOTES
Avoid any strong shock and drop to keep the tester in careful
package or deposit.
Store it in a dry place and away from heated surfaces.
Do not wipe it with any cleaning agents; in case of some gas
spreading, the normal testing would be disturbed.
Store the product out of children reach
Never immerse the product into water or into any other
liquids
In case the measuring is carrying out in smoking environment,
records can be altered.
All manuals and user guides at all-guides.com
JC-243
JC-243G alcohol test
11
13
ALCOHOL TEST
GB
GB