Turning On/Off; Tek 2.0 Setup; Calibrate The Compass - SportDOG TEK 2.0 Guia De Inicio Rapido

STEP :: 02

TURNING ON/OFF

TO TURN THE HANDHELD DEVICE ON:
Firmly press and release the On/Off button. The unit will vibrate and the start-up screen will display.
TO TURN THE HANDHELD DEVICE OFF:
Firmly press and hold the On/Off button. Release when the display goes blank.
TO TURN THE GPS COLLAR/E-COLLAR MODULE ON:
Press the On/Off button and release when the GPS Indicator Light comes on green. The GPS Collar will beep
1 to 5 times indicating which channel the unit is on.
TO TURN THE GPS COLLAR/E-COLLAR MODULE OFF:
Press and hold the On/Off button until the GPS Indicator Light comes on solid red and the GPS Collar beeps for
2 seconds. To extend the battery life between charging cycles, turn off the GPS Collar when it is not in use.
STEP :: 03

TEK 2.0 SETUP

The first time you turn on your TEK 2.0 Handheld Device, the Setup Wizard will walk you through setting up
your device. If you choose to skip the customisation process by selecting DEFAULT SETTINGS when the Setup
Wizard asks "Would you like to follow the guided setup or use the default settings?", your Handheld Device
will, by default, have one dog and one collar paired so that you can go directly to the field. Should you need
to add additional dogs, collars, or hunters or pair your collar again, please follow the steps in the online
Operating Guide.
STEP :: 04

CALIBRATE THE COMPASS

From the Home Screen, select Compass. Press the Menu Button and select Calibrate. You will need to rotate
the Handheld Device in all three dimensions as indicated below until the message on the display goes away.
Your setup is now complete. Use the Settings page to adjust settings at any time.
4
SPORTDOG.COM