Changing The Fuse; Technical Specifications - Vivanco iFMR 200 B Instrucciones De Uso

4. Now set the required frequency on the FM transmitter.
If there is already a radio programme on this frequency and
you get interference, then switch to a different frequency,
while keeping the frequency the same for both devices.
5. Switch your audio source (MP3 player etc.) on, and slowly turn
up the volume. In the same way, you can adjust the volume of
your car radio.
6. If you want to deactivate the FM transmitter again, press
down the on/off button and keep it down until the display
switches off.

Changing the fuse

1
For the protection of the device, the car adapter is equipped with
a fuse. If the fuse is defective (i.e. if the wire in the glass housing
has been burnt through), then you should carry out the following
steps:
1. Unscrew the end of the car adapter, taking note of the order
of the components.
2. Replace the burnt-out fuse with a new one (250V / 0.5A)
3. Screw the end part onto the car adapter again.
Explanation of the functions
Channel selection
2
With the 'Channel selection up' and 'Channel selection down'
buttons, you can set the radio frequency which you will then have
to set on your radio.
Rapid channel selection
With the 'Rapid channel selection' button, you can jump through
the settable frequencies in wider steps and so reach the required
3
frequency more quickly.
Flexible car mount
By loosening the screw on the car adapter it can be flexibly and
easily installed.

Technical specifications

Number of channels:
Frequency range:
Output power:
Operating temperature:
All rights reserved. The manufacturer reserves the right to make
technical modifications.
All manuals and user guides at all-guides.com
GB
205
87.5-108 MHz
max. 50 nW ERP
5 to 40°
11