Starck Parrot Zikmu Solo Manual Del Usuario página 24

All manuals and user guides at all-guides.com
Jack
You can connect your analogue audio player (ex: CD player, TV) to the Parrot Zikmu
Solo via a jack / jack cable to stream music. To do so, connect the cable to the jack
connector located under the speaker (diagram p.7) and start playing a track.
If you wish to connect the Parrot Zikmu Solo to an audio player with an optical audio
output (TV or DVD player), use the provided toslink / jack adapter (diagram p.7).
The standard configuration of a SPDIF source may be configured to reproduce the
original sound of the source.The Parrot Zikmu Solo only supports PCM format.
Compressed formats (dolby digital or DTS) are not supported. Refer to the
documentation of your source to configure the optical output to PCM only.
Note : Make sure that the connectors are inserted properly to avoid any disruption.
Note : To avoid any problem of sound saturation, increase the volume on the Parrot
Zikmu Solo rather than on your audio player. The audio mixer available on the Parrot
Audio Suite application allows you to define a volume level by default for each source
to avoid problems such as a too high volume level after an audio source change.
24 English