Pairing The Remote Control; Software Update - Starck Parrot Zikmu Solo Manual Del Usuario

If you want to restore the Parrot Zikmu Solo factory settings, hold down the
and the Bluetooth
Note: These resets can also be done using the web interface.

Pairing the remote control

If the Parrot Zikmu Solo remote control does not seem to work :
1. Make sure the battery is correctly installed (diagram p.4).
2. Restart the Parrot Zikmu Solo.
3. Press the SOURCE
have one minute to perform this action once the Parrot Zikmu Solo is turned
on.
,
> The
was successful.
Note: The pairing of the remote control is necessary after a reset of the speaker (long
press on the Reset button)

Software update

Make sure you have the latest software update on your Parrot Zikmu Solo. Using
the Web interface you can easily identify whether a new software update is
available. If you require an update 'click' to download and install the latest version.
26 English
All manuals and user guides at all-guides.com
button until the 4 leds of the control panel blinks.
and buttons simultaneously on the remote control. You
and lights blink simultaneously to indicate that the pairing
Wi-Fi