WISEUPSHOP WIFI35 Manual Del Usuario página 8

All manuals and user guides at all-guides.com
3. Launch the "BVCAM" APP again. If the camera shows "Online" on the "Live video" page,
it means the remote view setup is successful and the camera has entered into WAN mode.
The red indicator light will stay illuminated while the blue one will keep flashing. You can view
the camera's remote live video.
[Note]:
If the camera shows "Device Offline", that means the remote view setup failed and you need
to reset the camera (See VIII) and set up all over again.
V. Motion Detection Recording Setup
>> Make sure that the camera is added to the APP before you start.
5.1. Motion Detection Photograph Setup
5.1.1. Launch the "BVCAM" APP.
5.1.2. Enable the motion detection function as below:
Step1: Tap the setting icon on the "Live video" page then choose "Advance Config" or "Device
Settings".
Step 2: Go to "Alarm Config" page, there, you can set a desirable alarm sensitivity level, alarm
schedule, and alarm interval time. Enabling the "Warning Tone", "Push Notification" and
"On-screen Display" is also available.
Step 3: Tap "OK" to complete the whole setting.