Remote Control Description; Basic Operation - Premier SX-5266DUM Manual De Instrucciones

4. REMOTE CONTROL DESCRIPTION

Power - Power On/Off the
Open/Close - Open or Close VIDEO player
Setup - Bring up VIDEO player Setup Menu
OSD - Display Console Menu
Program - Bring up Program Menu
Time - Time Search
Reverse - Fast Reverse
Fwd - Fast Forward
Previous - Go back to the previous chapter during playback
Next - Skip to the next chapter during playback
Slow - Slow motion
Play/Pause - Begin disc play and select menu item
/Pause the playback
N/P - Select NTSC, PAL, AUTO
Stop - Stop playback
Title - Enter the title menu for VIDEO player disc
Menu/PBC - Bring up VIDEO player Menu/Playback Control
Angle - Use to access various camera angels on a VIDEO player
Audio - Select language
Subtitle - Select subtitle
Repeat - Repeat a chapter or title
A-B - Use to mark a segment to repeat between A and B
L/R - Change Mono chanel
Volume+/- Adjust volume
Zoom - Magnify areas within a picture
Enter - Press this button to turn on or off the player
Mode - To select VIDEO player/Card(Optional)/USB
Return - Enter the title menu for VCD disc
RAN - Random
(Optional
VIDEO - CVBS

5. BASIC OPERATION

1. Turn On the TV and Your VIDEO player
Put the electric plug into the electric socket, and the red lamp on the front panel will be turned on.
Press the Power button on the player or the remote controller, and"Loading..."appears on the TV
screen.
2. Place a Disc
Press the OPEN / CLOSE button on the remote controller or the front of the VIDEO player, and
"OPEN"appears on the screen. Then Place a disc gently into the tray with the disc' s label facing
up (double-sided discs have content on both sides, so you can place either side up), and press the
OPEN/CLOSE button again to close the disc tray, "CLOSE" appesrs on the TV screen, and the
player starts to read. Then the disc starts playing automatically. (Note: Of some certain type discs,
after reading out the type, the Play or Enter button should be pressed to start playing.)
3. Playing Discs
The contents of each disc menu vary according to how the disc was authored and what features are
included. The disc menu will be turned on for you to select, when Menu button pressed. Also play
and pause can be switched with the Pause button on the remote. Moreover, such as menu play, title
play, sequence play etc., These different play modes are offered.
P-3
VIDEO player
YUV S-Video HDMI)
(Optional)
Radio
function