Anthem LTX-300 Manual De Instrucciones página 25

2 Adjust the image size (zoom)
LENS LENS
●
Every time the
will be switched among "Focus", "Zoom" and "Shift".
LENS LENS
3 To end
BACK BACK
6
Turn off the power
While a confirmation
screen is displayed
Cool Down mode
●
When power off, the lens cover will be closed.
●
The power cannot be turned off within approximately 90 seconds
after it has been turned on. Start operation only after 90 seconds
time.
●
You can also press the
power. (
●
Pull out the power plug when the unit will not be used for a
prolonged time.
Downloaded From projector-manual.com Anthem Manuals
All manuals and user guides at all-guides.com
Lens Control
Zoom
Select
Back
Exit
MENU BACK
Operate
button is pressed, the adjustment item
LENS LENS
Blinking (Red Lamp)
Light on (Red Lamp)
button on the unit to turn off the
P15)
You can hide the image temporarily
You can hide the image temporarily.
Adjust accordingly by
pressing the up/down
buttons
●
●
About Cool Down mode
●
●
●
●
ENGLISH
TIPS
HIDE HIDE
Green light blinks
when the image is
hidden.
Press the button again to display
HIDE HIDE
image.
The power cannot be turned off when the
image is temporarily hidden.
MEMO
The Cool Down mode is a function to
cool down the lamp for approximately 60
seconds after projection is complete. This
function prevents the internal parts of the
unit from deformation or damage due to
overheating of the lamp. It also prevents
lamp blowout and premature shortening
of lamp life.
During Cool Down mode, the [STANDBY/
ON] indicator blinks in red.
After the Cool Down mode is complete,
the unit automatically returns to standby
mode.
Do not pull out the power plug during
Cool Down mode. This may shorten the
lamp life and cause a malfunction.
25