SCALESON S240 Instrucciones De Uso página 5

Measure room/object temperature
When the thermometer is switched off
f
press the memory button/mute
f
house symbol
Press the „SCAN" measuring button to measure the room
f
temperature.
To measure an object, hold the thermometer about 1-5 cm
f
away and press the measuring button.
The beep confirms the measurement.
f
You can now read the value.
f
Calling up stored values
When the thermometer is switched on
f
briefly press the memory button/mute
f
memory mode.
Press this button again to read the 35 memory records one
f
after the other.
If there is no value, „----M" is displayed.
f
appears in the display.
for 3 seconds until the
to enter the
5