Uline H-8278 Instrucciones De Montaje página 2

Figure 2
Figure 3
Figure 4
Figure 5
10
PAGE 2 OF 9
ASSEMBLY INSTRUCTIONS CONTINUED
8
9
11
2. Align mechanism with holes on bottom of seat
cushion with tension knob facing the front of seat.
Use four 1/4 x 7/8" screws (8) to secure. (See Figure 2)
NOTE: Use Allen wrench to tightly secure all
screws.
3. Align back support mounting plate with holes on
bottom of seat cushion. Use four 5/16 x 1/" screws (9)
to attach. (See Figure 3)
4. Slowly lower chair assembly onto the gas lift. Press
down on seat cushion to secure. (See Figure 4)
5. Align armrest with holes on back support and seat
cushion. Use two 5/16 x 2" screws (10) with two lock
washers (11) to secure loosely. Repeat on opposite
side. (See Figure 5)
0521 IH-8278