Audio/Video Setting - TViX PVR R-2200 Serie Guia De Inicio Rapido

4.2 Audio/Video Setting

This section indicates the A/V (Video or Audio) settings. Press SETUP button on the remote
controller and select the A/V.
This screen allows you to adjust the A/V settings of your TViX to your personal taste. Select
menu to exit this SETUP.
Dynamic Range Control : We recommend you to set the "DRC mode" to "Off", otherwise you could
not hear the sufficient sound (Volume Level Option).
Video Output : Select this when you connect the video through a composite or HDMI cable. With
HDMI setting, you can select the output resolution among 720p 50hz/60hz, 1080i 50hz/60hz. Setting
it to 1080i will work on all HD grade TVs.
Video Aspect Ratio : 4:3 Letter Box / 4:3 Pan & Scan for ordinary TVs / 16:9 for Wide TVs like HDTV
or Plasma TV.
If the ratio of the TV is 4:3, select the 4:3 letter box or 4:3 Pan & Scan. If the ratio is 16:9, select 16:9.
* The 4:3 Letter box can show the original ratio of the multimedia file in 16:9.
* The 4:3 Pan & Scan will adjust the image of the 16:9 multimedia file to the 4:3 of the TV screen by
scaling the image. (Currently, not support this mode)
* 16:9 can adjust any ratio of the multimedia file to the TV screen with the original image.
All manuals and user guides at all-guides.com
Analog Audio output : Select this when you
connect the audio with a stereo RCA cable (the
Red and White cable)
Digital Audio output: Select this when you
connect the audio with an optical cable for
digital audio connection to the Decoder/
Amplifier.
HDMI Audio : Select ON when you want to hear
the audio from HDMI.
Video Adjust : Set the Brightness - Contrast - Hue - Saturation.
Press OK or STOP button to save and exit current video setting.
Video Auto Switch : is used when the video out is changed according to the NTSC or PAL format.
Apply Video Output : press 'Apply Video output' to save current Video output mode.
4.3 HDTV Setting
This section indicates the HDTV (TV or Time-shifting) settings. Press the SETUP button on
the remote controller and select HDTV.
This screen allows you to adjust the HDTV settings of your TViX to your personal taste.
Select menu to exit this SETUP.
Country/Location : Select your country or location.
Time Zone : to use the EPG guide with correct recording times, you have to configure your time

zone by using the arrow keys.
English
TV Input : Select your input. The
TViX PVR R-2230 supports only
DVB-T (Air) signals.
TViX PVR R-2200 – Analog TV only
(Air & Cable)
TViX PVR R-2210 – NTSC Analog TV
& ATSC Digital TV (Air & Cable)
TViX PVR R-2230 – Free-to-Air
DVB-T Digital TV (Air only)