Audio/Video Setting - TViX PVR R-3300 Serie Guia De Inicio Rapido

4.2 Audio/Video Setting

This section indicates the A/V (Video or Audio) settings. Press SETUP button on the
remote controller and select the A/V.
This screen allows you to adjust the A/V settings of your TViX to your personal
taste. Select
HDMI Audio : Select ON when you want to hear the audio from HDMI.
Dynamic Range Control : We recommend you to set the "DRC mode" to "Off",
otherwise you could not hear the sufficient sound (Volume Level Option).
Video Output : Select this when you connect the video through a composite or
HDMI cable. With HDMI setting, you can select the output resolution among
720p 50hz/60hz, 1080i 50hz/60hz. Setting it to 1080i will work on all HD grade
TVs.
Video Aspect Ratio : 4:3 Letter Box / 4:3 Pan & Scan for ordinary TVs / 16:9 for
Wide TVs like HDTV or Plasma TV.
If the ratio of the TV is 4:3, select the 4:3 letter box or 4:3 Pan & Scan. If the
ratio is 16:9, select 16:9.
* The 4:3 Letter box can show the original ratio of the multimedia file in 16:9.
* The 4:3 Pan & Scan will adjust the image of the 16:9 multimedia file to the 4:3
of the TV screen by scaling the image. (Currently, not support this mode)
* 16:9 can adjust any ratio of the multimedia file to the TV screen with the
original image.
All manuals and user guides at all-guides.com
menu to exit this SETUP.
Analog Audio output : Select
this when you connect the audio
with a stereo RCA cable (the Red
and White cable)
Digital Audio output: Select this
when you connect the audio
with an coaxial/optical cable for
digital audio connection to the
Decoder/Amplifier.

English