Mellerware Steamy! Manual De Instrucciones página 6

be high when the
appliance is in use.
If the supply cord is
10.
damaged, it must
be replaced by the
manufacturer, its
service agentor similary
qualified persons in
order to avoid a hazard.
This appliance is for
11.
household use only, not
professional, industrial
use.
Unplug the appliance
12.
from the mains before
refilling the water tank.
Disconnect the
13.
appliance from the
mains when not in use
and before undertaking
any cleaning task.
Take care when use the
14.
appliance due to the
emission of steam.
Ensure that the voltage indicated
–
on the rating label matches the
mains voltage before plugging in
the appliance.
Connect the appliance to a base
–
with an earth socket withstanding
a minimum of 16 amperes.
The appliance's plug must fit into the
–
mains socket properly. Do not alter
the plug. Do not use plug adaptors.
Do not use or store the
–
appliance outdoors.
Do not force the power cord. Never
–
use the power cord to lift up, carry
or unplug the appliance.
Do not wrap the power cord
–
around the appliance.
Do not clip or crease the power cord.
–
Do not allow the power cord
–
to come into contact with the
appliance's hot surfaces.
Check the state of the power
–
cord. Damaged or tangled cables
increase the risk of electric shock.
Do not touch the plug with
–
wet hands.
Do not use the appliance if the
–
cable or plug is damaged.
If any of the appliance casings
–
breaks, immediately disconnect the
appliance from the mains to prevent
the possibility of an electric shock.
Do not touch the heated parts of
–
the appliance, as it may cause
serious burns.
USE AND CARE
Fully extend the appliance's power
–
cable before each use.
Do not use the appliance if its
–
accessories are not properly fitted.
Do not switch the appliance on
–
without water.
Do not use the appliance if the on/
–
off switch does not work.
Respect the MAX level indicator.
–
Disconnect the appliance from the
–
mains when not in use and before
undertaking any cleaning task.
EN