Clearing A Clogged Discharge Chute; Service, Maintenance And Storage; Emissions - Snapper 1226 Manual Del Operador

Ocultar thumbs Ver también para 1226:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

21. Keep in mind the operator is responsible for acci-
dents occurring to other people or property.
22. Data indicates that operators, age 60 years and
above, are involved in a large percentage of power
equipment-related injuries. These operators should
evaluate their ability to operate the unit safely enough
to protect themselves and others from injury.
23. DO NOT wear long scarves or loose clothing that
could become entangled in moving parts.
24. Snow can hide obstacles. Make sure to remove all
obstacles from the area to be cleared.
CHILDREN
Tragic accidents can occur if the operator is not alert to the
presence of children. Children are often attracted to the
unit and the operating activity. Never assume that children
will remain where you last saw them.
1. Keep children out of the area and under the watchful
care of another responsible adult.
2. Be alert and turn unit off if children enter the area.
3. Never allow children to operate the unit.
4. Use extra care when approaching blind corners,
shrubs, trees, or other objects that may obscure
vision.
CLEARING A CLOGGED DISCHARGE
CHUTE
Hand contact with the rotating impeller inside the dis-
charge chute is the most common cause of injury associ-
ated with snowthrowers. Never use your hand to clean
out the discharge chute.
To clear the chute:
1. SHUT OFF THE ENGINE.
2. Wait 10 seconds to be sure the impeller blades have
stopped rotating.
3. Always use a clean out tool, not your hands.
SERVICE, MAINTENANCE, AND STORAGE
1. Check shear bolts and other bolts at frequent inter-
vals for proper tightness to be sure the equipment is
in safe working condition.
2. Never store the machine with fuel in the fuel tank
inside a building where ignition sources are present
such as hot water and spacer heaters, or clothes dry-
ers. Allow the engine to cool before storing in any
enclosure.
3. Always refer to the operator's manual for impor-
tant details if the snowthrower is to be stored for an
extended period.
4. Maintain or replace safety and instruction labels as
necessary.
5. Run the machine a few minutes after throwing snow
to prevent freeze-up of the collector/impeller.
6. If fuel is spilled, do not attempt to start the engine but
move the machine away from the area of spillage and
avoid creating any source of ignition until fuel vapors
have dissipated.
7. Always observe safe refueling and fuel handling prac-
tices when refueling the unit after transportation or
storage.
All manuals and user guides at all-guides.com
8. Always follow the engine manual instructions for stor-
9. Always follow the engine manual instructions for
10. Keep nuts and bolts tight and keep equipment in
11. Never tamper with safety devices. Check their proper
12. Components are subject to wear, damage, and dete-
13. Check control operation frequently. Adjust and ser-
14. Use only factory authorized replacement parts when
15. Always comply with factory specifications on all set-
16. Only authorized service locations should be utilized
17. Never attempt to make major repairs on this unit
18. Check shear bolts and other bolts at frequent inter-

EMISSIONS

1. Engine exhaust from this product contains chemicals
2. If available, look for the relevant Emissions Durability
IGNITION SYSTEM
1. This spark ignition system complies with Canadian
7
Safety Rules & Information
age preparations before storing the unit for both short
and long term periods.
proper start-up procedures when returning the unit to
service.
good condition.
operation regularly and make necessary repairs if
they are not functioning properly.
rioration. Frequently check components and replace
with manufacturer's recommended parts, when nec-
essary.
vice as required.
making repairs.
tings and adjustments.
for major service and repair requirements.
unless you have been properly trained. Improper ser-
vice procedures can result in hazardous operation,
equipment damage and voiding of manufacturer's
warranty.
vals for proper tightness to be sure the equipment is
in safe working condition.
known, in certain quantities, to cause cancer, birth
defects, or other reproductive harm.
Period and Air Index information on the engine emis-
sions label.
ICES-002.

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

1695571

Tabla de contenido