Tabla De Contenido; Installation Examples - NEC NP01TK Manual De Instalación Y Ajuste

Mounting unit for table projection
NP01TK Installation and Adjustment Manual
Thank you very much for purchasing the NEC table projection
mounting unit.
By mounting your projector to this product, you can install your
projector for table projection, floor projection (downward projec-
tion), and upward projection.
Read this installation and adjustment manual carefully in order to
use this product correctly.
For a list of the supported projectors, please see the NEC web-
site or NEC catalogs.
The installation and adjustment manual is mainly for the NP-
UM351W projector.

Installation examples

Table top projection (downward projection)
Project onto a white table or sheet screen.
Attach the enclosed table securing bracket.
Refer to page ENG-6
Floor projection (downward projection)
Paste the sheet screen on the floor and then project onto the floor.
For permanent installations and when using the projector for events etc., use
anchor bolts and wooden screws to secure the projector to the floor. Refer to
page ENG-7
Upward projection (table rear projection)
Project from the rear (table bottom) onto a table that has a translucent screen
and so on.
Rotate the projector 180 degrees and set it to project upwards. Refer to page
ENG-6
CONTENTS
Please heed the following .........................................................ENG-2
Introduction .............................................................................ENG-3
Packaged Parts ..................................................................ENG-3
Dimensions of Parts ...........................................................ENG-3
Projection distance and screen size .....................................ENG-4
Adjustment of the projection screen ..........................................ENG-4
Installing the Projector ..............................................................ENG-5
Assembly of the mounting unit for table projection ...............ENG-5
Mounting of the table securing bracket ................................ENG-6
Projector upward projection setting .....................................ENG-6
Floor securing ....................................................................ENG-7
Wiring of cables .................................................................ENG-7
Specifications ..........................................................................ENG-7
ENG-1