Heating-Up Time; Data Table - Blanco Hot Boiler 4L EU Instrucciones De Uso Y De Montaje

EN
CLEANING, CARE, MAINTENANCE
13.3

Heating-up time

It takes about 15 minutes for water to heat up during commissioning or when all the
hot water has been used up.
13.4

Data table

Technical data
Height (mm):
Diameter (mm):
Net weight (boiler + packaging):
Total weight (filled boiler):
System pressure:
Maximum pressure as per IEC 60335:
Minimum pressure in water inlet:
Highest pressure in water inlet:
Ambient temperature at installation location:
Hot water temperature:
Maximum temperature during normal operation:
Thermal safety shut-off:
Medium:
Power supply:
Heat-up time (from 10 °C to the maximum temperature): about 15 minutes
Power consumption:
Protection type as per EN 60529:
Stand-by losses (when switched on):
Stand-by losses (when switched off):
Energy efficiency class:
Material in supply tank:
Fill level:
Flow rate at 99 °C at the outlet:
Designed for water quality:
Filter type:
Filter brand:
Operation with designated BLANCO hot water mixer taps and the supplied safety
assembly module.
26
337
229
max. 4.8 kg
about 8 kg
10 bar
20 bar for 3 minutes
1 bar
5 bar
0 - 40 °C
100 - 105 °C
105°C ± 1°C
124°C ± 3°C
drinking water
230 VAC, 50/60 Hz
2100 W (+ 5% / -10%)
IP X4
max. 16 W
max. 1 W
A
grade 2 titanium
4 litres (± 5%)
≥ 2.5 litres
max. 12 °dTH
BLANCO filter cartridge
BWT