Publicidad
Idiomas disponibles
Idiomas disponibles
Outlook
3. Buzzer indicator
2. Decoding LED indicator
1. Logo
7. Scanning window
Wire Installation
One USB wire, as the above picture shows. Notice: The host could provide
power for the scanner through USB wire. Scanner does not need additional
power supply.
Installation process is as follows:
1. Plug the RJ45 end to the tail of the scanner.
2. Connect the other end to the host's USB interface.
3. The buzzer and LED light will give a signal if connected right.
4. Windows will detect the USB device automatically.
6. Trigger button
4. Wire demolition hole
5. Wire connection hole
Publicidad
