Publicidad
Idiomas disponibles
Idiomas disponibles
Fault Solution
Fault
Pressing
down
buttons, the scanner
doesn't react
Could send laser, but
can not decode
The barcode decoded,
unable to transfer to host
Scanned digits does
not show up right in
the host
Possible Reasons
The scanner got no
power
the
Connection/Wire
loosen
Don't set the scanner
with the right barcode
type
Can not read the
barcode
Distance wrong be-
tween
barcode
Don't set the scanner
with the right host type
Don't set the scanner
to pare with the host
scanner
and
Solutions
Check
host
make sure the power is
on if the configuration
needs it.
Check the wire con-
nection loosen or not
Ensure setting the scan-
ner right, make the scan-
ned barcode readable
Check the barcode to
see if it is damaged, plea-
se try to scan the same
type testing barcode
Move the scanner fur-
ther or nearer to the
barcode
Ensure the configuration
and telecom port right
Ensure you choose the
right host, please check
the host type configure
and edit options
power,
Publicidad
