Bosch VCM8637/00T Manual De Instalación página 7

All manuals and user guides at all-guides.com
8637 & 8638 | Installation Instructions
Observation Camera
INTRODUCTION
Your new CCD camera is developed for use with a special
observation system monitor. It features a sensitive microphone thus
registering both images and sound via the monitor, as well as input
contacts for connecting external alarm devices.
INSTALLATION
WARNING:
Disconnect the monitor from the mains supply before
disconnecting a camera or accessory.
Only operating the stand-by key is not sufficient.
When the mains supply is connected, all camera lines are scanned.
The monitor uses this to register the camera configuration of the
system and to check whether any modifications have been made.
Sound
If required, the microphone incorporated in the camera, can be
switched off (fig. A-14).
If an intercom box is included in the camera line, the sound of
camera and intercom box will be reproduced by the monitor.
The illustrations to which this manual refers, are shown on the front
and back jacket flap.
Bosch Security Systems | 2004-06
EN | 2
ENGLISH EN