Information About The Appliance; Preparations; Starting Up The Appliance - Ambiano MD 37430 Manual Del Usuario

Information about the appliance

Information about the appliance
• The coolant circuit is tested for seal-tightness. This corresponds to the relevant
safety regulations for electrical appliances.

Preparations

− Remove all packaging material.
− Dispose of the cushion parts of the packaging made from foamed polystyrene
separately.
− Rinse the inside of the appliance and the equipment elements with lukewarm
water, a soft towel and a mild cleaning agent and let them dry.
− Free-standing installation only.
− Set up the appliance in a suitable location on a stable, smooth surface (cf. also
section "Location" on page 9)
− The appliance must stand straight. Compensate for unevenness in the ground by
unscrewing and setting the adjustable feet from
To be able to open the door completely, there
must be the appropriate adjacent spatial
dimensions.
− Check whether the bottle trays
for the bottles are properly situated
in the guide rails. Make the necessary
corrections until the shelves are
situated correctly in the rails.
Starting up the
appliance
− Connect the appliance to a grounded power outlet. The local power supply voltage
must correspond to the technical specifi cations of the appliance.
An acoustic signal is emitted and the current temperature inside the appliance appears
on the display. After that, the appliance begins cooling its interior.
− Distribute the bottles evenly on the bottle trays
A bottle tray is suitable for storing two standard size wine bottles.
The temperature on the bottom bottle tray is somewhat lower than on the
top bottle tray. Therefore, place bottles that must be cooled the most on the
lower bottle tray.
12
10
10
9
.
approx. 14 in
.
approx. 33 in