Symmons Unity S-6603 Instalación Y Manual De Funcionamiento Y Mantenimiento página 4

Installation
Note:
For valve body installation, please
see valve body manual.
1) Install mounting plate (G) to
shower valve. Secure with two
screws (F).
G
F
2) Install diverter handle or volume
control handle (D) to shower
escutcheon (E).
E
D
3) Attach shower escutcheon (E) to
mounting plate (G).
E
G
Note: Tabs should snap into place.
4) Install dome cover (C) to valve by
turning clockwise.
C
5) Install handle (A) to valve and
secure with set screw (B).
A
B
6) Install tub spout (P) to pipe fitting.
Turn clockwise to secure.
P
4
7) Install wall ell (L) to pipe fitting.
Tighten set screw (M) to secure.
L
8) Place mounting plate (J) in po-
sition, mark and drill 3/16" holes
for tile anchors (J1), 5/16" holes
for drywall anchors (J2). Install
anchors.
J1
J2
2
Note: For drywall 1/2" thick or less,
insert anchor tool (J3) into drywall
anchor (J2) to secure behind wall
prior to installing wall cradle.
M
2
J
J2
J3