DAS DSP-48 Manual Del Usuario página 20

OPERATION
Op1 HighPassFilter
19.7Hz 24dB Linkwitz
Op1 LowPassFilter
16k0Hz 24dB Linkwitz
Op1 LIMITER 0dBu
Inf A.5ms R100ms
19
All manuals and user guides at all-guides.com
Press NEXT key to enter output high-pass sub-menu.
Press PREV key to enter output delay sub-menu.
Press and key to switch gain, phase and input source and so on
option. Arrow indicate current option.
Press PARAMETER key to switch channel.
OUTPUT HIGH-PASS FILTER
Filter frequency range is 19.7Hz~21.9kHz.
Filter type has 12dB Butterworth,12dB Bessel,12dB
Linkwitz,18dB Butterworth,18dB Bessel,24dB Butter-
worth,24dB Bessel,24dB Linkwitz,48dB Butterworth,
48dB Bessel,48dB Linkwitz.
Use PARAMETER to adjust current option parameter value.
Press NEXT key to enter output low pass sub-menu.
Press PREV key to enter output EQ sub-menu.
Press and key to switch frequency and slope and so on option.
Arrow indicate current option.
Press PARAMETER key to switch channel.
OUTPUT LOW PASS FILTER
Filter frequency range is 19.7Hz~21.9kHz,OFF.
Filter type is 12dB Butterworth,12dB Bessel,12dB
Linkwitz,18dB Butterworth,18dB Bessel,24dB Butter-
worth,24dB Bessel,24dB Linkwitz,48dB Butterworth,
48dB Bessel,48dB Linkwitz.
Use PARAMETER to adjust current option parameter value.
Press NEXT key to enter output limiter sub-menu.
Press PREV key to enter output high pass sub-menu.
Press and key to switch frequency and slope and so on option.
Arrow indicate current option.
Press PARAMETER key to switch channel.
OUTPUT LIMITER
Limiter threshold value range is -20dBu~20dBu step is 1dBu.
Limiter radio parameter has 1.2:1,1.5:1,2:1,3:1,4:1,6:1,10:1,
20:1,Infinite.
Limiter attack time parameter has 0.5ms/dB,1ms/dB,2ms/dB,
5ms/dB,10ms/dB,20ms/dB,50ms/dB.
Limiter release time parameter has 10ms/dB,20ms/dB,50ms/dB,
100ms/dB,200ms/dB,500ms/dB,1sec/dB.
Use PARAMETER to adjust current option parameter value.
Press NEXT key to enter copy output data sub-menu.