Trevi FRS1270USB Manual Del Usuario página 16

ENGLISH
Standby function: To reduce battery consumption, the FRS1270USB
headphones are equipped with a circuit that puts the headphones in
standby mode if they do not receive any audio signal from the usb don-
are out of the usb dongle range (about 10 metres). When the appliance
is in standby mode the operation led (4) turns off. To reactivate the
headphones use the On/Off switch (1). Move it to the Off position and
then to the On position again.
position.
CONNECTING THE HEADPHONES TO
AN AUDIO DEVICE
multimedia player) it is necessary to use the audio adapter (7) sup-
plied in the package.
- Insert the usb pc dongle (8) in the appropriate port on the audio
adapter (7).
- Use the jack-jack audio cable and the Jack-RCA extension cord if
player) to the adapter (7). Insert one jack into the LINE IN audio input
(12) of the adapter (7) and connect the other end of the cable (jack or
RCA) to headphones output or to the audio output of the audio/video
- Make sure that the batteries are inserted correctly in the audio adap-
ter (7) or use the power adapter and the appropriate cable supplied in
All manuals and user guides at all-guides.com
move the rotary switch (1) to the off
PAG.16
FRS1270USB