View from Above
Right Blind Corner
Left Blind Corner
2700 Oak Industrial Drive NE , Grand Rapids, MI 49505 USA
800.253.1561 • 616.459.3311 • www.kv.com
Slide-Out Base Blind Corner Unit
Instructions for changing a right unit to a left unit or a left unit to a right unit.
1.
Extend both pull out units. (1)
2.
Remove upper and lower slides with the enclosed Allen Wrench. (2)
3.
Swap the two pull out assemblies so that the drawer members pull out on the opposite side of the
unit. If done correctly, the knobs will not have to be removed as they will remain in the correct
position on the unit. (3)
4.
Re-attach the slides to unit. (4)
5.
Reverse the location of the 3 rollers on the unit, if they were installed during the standard
installation. (5)
6.
The unit is now ready for installation.
1
3
5
©2015 Knape & Vogt. All rights reserved. Made in USA. Knape & Vogt
2
4
reserves the right to change specifications without notice.
®
RN277EFS_D_1115