HURAKAN HKN-D32 Guia De Inicio Rapido página 6

EN
1. Brief introduction
Thank you for purchasing our professional equipment.
Before you start operating it, you should read and understand this Certificate and keep it
during the whole service life of the equipment. Please keep in mind that observance of
the instructions presented in this Certificate extends the service life of the equipment
and prevents injury of operating personnel.
2. Technical specifications
Model
Voltage, V
Temperature, ℃
Power, kW
Dimensions, mm
Mass, kg
3. Installation and operation
1. Ground the equipment before using.
2. Check the nominal voltage, it must be ~220V.
3. Each time before power up, add water to the internal container up to 0.6 liters.
4. Turn on the power, the power indicator will light up, turn the heating switch, choose
the storage temperature for the products, the temperature can be maintained at the
same level.
5. If it is necessary in the operation, turn on the light, it facilitates the work and
highlights the showcase.
6. After use and during cleaning, the showcase power should be turned off.
7. If a fault is detected, contact a qualified technician for repair.
8. The use of this equipment is prohibited for people with physical, sensory or mental
disabilities as well as for people without experience and qualifications (including
children).
It is strictly forbidden to clean the device with compressed water.
4. Transportation and storage
When transporting, avoid vibration and shock. Do not turn over or squeeze. Protect from
water, store in a warehouse with good ventilation.
5. Cleaning and maintenance
1. After use, clean the showcase with a non-corrosive cleaning agent.
2. It is forbidden to paint the cabinet surface, there is a soluble liquid insulation.
6. Electric diagram
6
HKN- D32
220
50-110
0.65
490*490*810
15