Baja WR96 Manual De Operación página 17

CLEANING/ADJUSTING DRIVE CHAIN
The drive chain should be cleaned, lubricated, and inspected
every time you ride the mini bike.
WARNING:
Always inspect the drive chain tension before you ride the
mini bike. Too much slack could allow the drive chain to
come off the sprockets, which could cause an accident
resulting in serious personal injury or cause serious dam-
age to the mini bike.
Cleaning the drive chain:
 Wash the drive chain with an approved chain cleaner.
 Dry the chain, then lubricate with chain lubricant or the
equivalent.
REAR AXLE
All manuals and user guides at all-guides.com
MAINTENANCE
BOLT
Adjusting the drive chain:
For proper performance, the drive chain should never have
more than 0.5-0.75 in. (15-20 mm) slack.
NOTE: The chain should be replaced when it reaches its
maximum adjusting limit.
To adjust:
 Loosen the rear axle bolt.
 Turn the chain adjusting nuts on the left and right sides to
adjust the tension of the chain and to align the marking of
the chain adjuster with the engraved lines in the similar
position on both sides.
 Retighten rear axle bolt. Torque to 37-44 ft. lbs. (50-
60 Nm).
CHAIN
ADJUSTING
NUT
17 — English
REAR AXLE
BOLT
REAR AXLE
BOLT
© 2010 Baja, Inc. All Rights Reserved.
CHAIN
ADJUSTING
NUT
CHAIN
ADJUSTING NUT