Azio E300S-U31 Manual De Instrucciones página 10

All manuals and user guides at all-guides.com
Windows XP and 2000 Hard Drive Installation
If the external hard drive does not mount after you have
plugged-in and turned on your external drive, you will
need to partition and format the drive by doing the
following:
1. RIGHT-CLICK on "MY COMPUTER", click on
"Manage".
2. Click on "DISK MANAGEMENT". A list of all the
drives in your system will be displayed.
3. If 'Write Signature and Upgrade Disk Wizard' auto
starts, you can use this wizard to initialize the hard
disk and create partition and format the drive.
4. Otherwise, locate the respective drive listed in the
lower right side of the window. Right click on the
drive, make a new partition and format the drive.