Azio E300S-U31 Manual De Instrucciones página 11

All manuals and user guides at all-guides.com
Windows 98SE and ME Hard Drive Installation
If the external hard drive does not mount after you have
plugged-in and turned on your drive kit, you would need
to partition and format the drive by doing the following:
1. RIGHT-CLICK on "MY COMPUTER", then click on
"PROPERTIES".
2. Click on "DEVICE MANGER".
3. Click on "DISK DRIVES".
4. DOUBLE-CLICK on the drive that corresponds to
the external hard drive.
5. Click on "SETTINGS" tab.
6. Check the REMOVABLE box.
7. Click "OK" then restart the computer.
8. After restarting, DOUBLE CLICK on "MY
COMPUTER", the external hard drive will now
appear. DOUBLE CLICK the drive to format the
drive.