Regular maintenance will prolong the life of your spin bike and prevent injury. We
strongly recommend that you do the following on a regular basis:
1. Clean the bike after use with a soft cloth – ensure it is dry. Note, a build up of
moisture over time will cause corrosion.
2. Clean the Computer display with a soft cloth and anti-static computer spray to
remove dust or finger prints. Note, harsh chemicals will destroy the protective coating
on the Computer and cause a static build up inside the Computer that could damage the
components.
3. Check the front and back stabilizers each time you use the bike to ensure the bike
is stable and level with the floor.
4. Check and tighten loose nuts/buts, the saddle adjustment locks, pedals, and
handlebars to ensure they are secure each time you use the bike to avoid injury.
5. A spent battery is hazardous waste, please dispose of it correctly, and do not throw
it in the trash.
6. For replacement parts, contact the distributor.
EN
MAINTENANCE
31