Swarovski 5061611 Instrucciones De Uso página 3

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
GOODWILL OR REPUTATION, ARISING FROM
SWAROVSKI'S WATCHES, INCLUDING DEFECTS
OR FAILURES IN SWAROVSKI'S WATCHES. ANY
REPAIR SERVICE SWAROVSKI MAY OFFER IS NOT
A WARRANTY.
Swarovski does not authorize any person to assume
for it any liability or obligation in connection with
the sale of watches. To make a claim under our
warranty service, please take the defective watch,
in its original packaging and with the receipt, to
your authorized Swarovski retailer.
BATTERY
Our quartz watches are powered by batteries.
Replace weak or dead batteries immediately. Weak
or dead batteries may leak fl uids that can damage
the movement.
OPERATING INSTRUCTIONS
Setting the Time and Date
Both the time and date are set with the crown.
A
B
C
• To set the time pull out the crown to position
B/C. Turn the crown until the hour and minute
hands have reached the desired time.
• When the desired time has been selected, push
the crown back into position A.
• To set the date (depending on the model) pull
out the crown to position B. Turn the crown until
the desired date appears.
• When the desired date has been selected,
push the crown back into position A.
Setting the Time from
the Case Back
To set the time, gently insert a
ballpoint pen into the tiny hole
located in the center of the
case back. Simply press until
the desired time is reached.
Changing Straps
To remove the strap
• Gently pull spring clip and lift the strap out
To insert the new strap
• Place one end of the new strap into the slot.
• Gently pull spring clip once again and insert
the other end into the remaining slot.
• Release the spring clip until it clicks.
• Gently pull the straps to make sure they are
attached properly
1
1
2
2
1
1
2
2

Publicidad

Tabla de contenido
loading

Tabla de contenido