System Information - Junt SV-SERVER-01 Manual De Operación

The Reset button (5) triggers a reset or an update.
Reset network settings, DHCP
operation active
Factory reset
Initialise update operation

System information

The Smart Visu Server is used to visualise and operate a KNX system connected to the same
network via a smartphone, tablet, laptop or PC and to control Philips Hue systems (SV-Home). A
local network is required for it to function.
The connection to the KNX is made via the KNX IP interface. The connection to the Philips Hue
system is made via the Philips Hue Bridge.
Start-up takes place via the web-based interface (SV-Control).
The technical documentation is also available here.
The server organises KNX functions and Philips Hue operation into areas, functions and actions.
Area: An area indicates an assignment, e.g. to a room.
Up to 24 areas are possible.
Function: A function corresponds to, for example, a KNX function, thus possibly
comprising multiple group addresses, e.g. switching channel with
feedback. A function could also be the link to a Philips Hue lamp.
Up to 240 functions can be created with up to 1200 datapoints. Each functi-
on can be assigned to one or more areas.
Action: An action is a grouping of one or more functions. Actions can be triggered
by events, by time or via user-defined controls. In addition, status logics are
represented.
KNX projects can be imported from the OPC export (3-level group address) of ETS3, ET4 or
ETS5 or be created manually.
All manuals and user guides at all-guides.com
Press the button ≥ 5 seconds, LED flashes yellow,
press the button again briefly
Press the button for 20 seconds, LED flashes red,
press the button again briefly
Press the button briefly 5x
- LED turns magenta: No update available
- LED flashes magenta: Update operation
USA
7