Removing The Refrigerator Doors; Tools You'll Need - Samsung RS25H5121 Serie Manual De Usuario

Ocultar thumbs Ver también para RS25H5121 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

How to install the handles
Orient each handle so that the end with the sticker
attached is at the top and the holes with the
tightening screws are facing each other.
Then, follow the directions below to install each
handle.
By using Phillips screwdriver, fix the screw
(optional) and then put he handle on the fixer by
sliding them down firmly.
L
( 2 )
By using L- wrench, fix the screw with the longer
part of it and then fully tighten up with the shorter
part.
( 4 )
L
DA68-02981E-10.indb 11
All manuals and user guides at all-guides.com
REMOVING THE REFRIGERATOR
DOORS
If your entrance won't allow the refrigerator to pass
easily through it, you can remove the refrigerator
doors.
To remove the doors, follow the steps below.
If you do not need to remove the doors, go to
"Leveling the Refrigerator" on page 15.

Tools You'll Need

( 1 )
1. Remove the Front Leg Cover
Open both the freezer and refrigerator doors.
( 3 )
Unscrew the three screws holding the front leg
cover in place by turning them counter-clockwise.
When the screws are loose, remove the front leg
cover.
Fix the handles to the doors
by sliding them down firmly.
( 5 )
S
When disassembling make sure the unit is turned
off.
English - 11
Philips
Flat-blade
Screwdriver
Screwdriver
Front leg cover
CAUTION
10 mm Socket
Wrench
Screw
2018. 7. 4.
1:52

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Rs25h5111 serie

Tabla de contenido