HOT TOOLS PRO SIGNATURE Manual Del Propietário página 7

This appliance has a polarized plug (one blade is wider than the other).
As a safety feature, this plug will fit into a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do not attempt to force the plug
into an improper outlet.
For U.S. residents only: In the event of an unusual circumstance such
as immersion, the protective device will not allow the dryer to operate.
Periodically check the safety plug to verify it is in proper working order.
Plug the appliance in an electrical outlet and press the test button.
The dryer should stop immediately. To resume operation, press the
reset button.
• For faster results, towel dry hair
to remove excess water, then run
a comb through damp hair to
detangle for best results.
• Plug the appliance into an
electrical outlet.
• To turn unit on, place fingers
around the temperature control
dial and rotate counterclockwise
to the desired setting. Adjust the
switch to the selected setting.
Use the LOW setting on fine or
thin hair and the HIGH setting
on thick and coarse hair. Use the
COOL setting to lock in the style.
• Start styling. Separate hair into
manageable sections.
START UP