Cleaning Instructions - HOT TOOLS PRO SIGNATURE Manual Del Propietário

FOR VOLUMINOUS BLOWOUTS
• Use the One-Step Round Brush attachment, place the dryer close to
the roots and brush down toward the ends. The nylon bristles with
Refresh ™ activated charcoal gently grip hair to smooth and promote
3
shine.
• For extra lift at the roots, hold the dryer for 2 to 3 seconds under the
roots.
• To curl ends IN, place the dryer UNDER the ends and hold or 2 to 3
seconds before rotating inward. To curl ends OUT, place the dryer OVER
the ends and hold for 2 to 3 seconds before rotating outward.
• When drying is complete, use the cool function to set the style.
• Wait for the dryer to cool before removing the attachments and storing.
Do not wrap the cord around the dryer.

CLEANING INSTRUCTIONS

If cleaning becomes necessary, unplug the appliance from the power
source and wipe the exterior with a damp cloth. Dust and lint can
be removed from air intake openings with a small brush or vacuum
cleaner brush attachment. DO NOT wash in water or allow moisture or
additional debris to enter the unit while cleaning.
CHANGING THE BRUSH
ATTACHMENTS
To change a brush attachment, turn the styler off, unplug the appliance
and allow it to fully cool.
• Press the release
button down and
slightly twist to
the right to unlock
handle as you pull
the attachment
away from the
body of
appliance.
• Align the new
attachment with
the handle and
insert it with a
slight twist to the
left to lock the
attachment.
the